Raw Brass has a rustic matte look, with rough surfaces and some tarnishing (color spots). Polished Brass goes through extensive hand polishing to give it a smooth, shiny finish. 3D printed Brass consists of 15% zinc, 5% tin, and 80% copper.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

Raw bronze has a rustic matte look with rough surfaces. It is a high-detail metal with a deep red color similar to rose gold. It has a subtle marbling effect, and the silvery highlights give each piece their own unique character. Polished Bronze goes through extensive hand polishing to give it a smooth, glossy finish. 3D printed Bronze consists of 10% tin and 90% copper.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

All Gold and Platinum products go through extensive hand-polishing to give them a smooth, shiny finish. 18k Gold is brighter and more vibrant. 18k Rose Gold has a pinkish tint, and 18k White Gold looks like silver with a hint of gold. Platinum has a bright silver-white color. We use Lost-Wax Printing and Casting. This means we first 3D print your model in wax and then cast it the traditional way.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

Premium Sterling Silver is highly hand polished to a "wet" sheen and looks very shiny.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

Made with high-grade & high-strength steel (316L). Raw Steel is treated with a blasting operation after printing. Outer surfaces, inner areas and sunken areas get a matte look. This is the gentlest post-processing finish with the highest level of detail.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

This TiAl6V4 alloy doesn’t look like the traditional shiny milled Titanium. Instead it’s a bit grayer and more matte with a slightly rougher and less defined yet precise surface. It is the strongest material that can currently be 3D printed.

1.2 mm

Thickness is around 1 mm or less depending on the material and finish (polishing)

Fluoro Neon Acrylic absorbs light through the surface of the material and emits it from the edge. Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. Acrylic is non toxic and recyclable in some areas. Thickness is of 3 mm (0.118 in). There can be variations from one Memento to another, both in color and thickness. Laser cut and engraved in the USA.

Clear Green Acrylic is clear when viewed through the surface but the edge is green as in the appearance of glass. Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. Acrylic is non toxic and recyclable in some areas. Thickness is of 3 mm (0.118 in). There can be variations from one Memento to another, both in color and thickness. Laser cut and engraved in the USA.

1.3 mm

Neon Acrylic absorbs light through the surface of the material and emits it from the edge. Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. Acrylic is non toxic and recyclable in some areas. Thickness is of 3 mm (0.118 in). There can be variations from one Memento to another, both in color and thickness. Laser cut and engraved in the USA.

25 mm : 1.25 mm, 30 mm : 1.3 mm, 35 mm : 1.5 mm

Bamboo is a material with natural variation, such as lighter or darker wood grain. The Bamboo sheet is made of five layers of veneer (thin slice of wood). The bamboo joints are visible on the surface and break up the grain creating a unique appearance. Bamboo is 100% renewable and sustainable. Thickness is about 2.7 mm (0.106 in), but it may vary from a sheet to another, our manufacturer tolerance is as follows: 2.5 - 3.2mm. There can be variations from one Memento to another, due to the nature of material, both in appearance and thickness. All wood is susceptible to scratches and water damage. Laser cut and engraved in the USA.

Walnut Premium Veneer has an MDF core with real wood veneer (thin slice of wood) on each side which is sanded smooth and finished with a clear coat. It has a high grade appearance, the grain direction will change the overall appearance depending on the light direction. Thickness is about 3.5 mm (0.137 in), but may vary from a sheet to another, our manufacturer tolerance is as follows: 3.0 - 4.0mm). There can be variations from one Memento to another, due to the nature of material, both in appearance and thickness. All wood is susceptible to scratches and water damage. Laser cut and engraved in the USA.

1.3 mm