Acrylic & Wood Mementos
(pre-order)

Your Memento will be the most precise and accurate depiction of the Solar System commemorating the personal date of your choosing.

Made in USA.

ESTIMATED SHIPPING: JANUARY

Your personal date
Please enter a valid date
Size
Material
$25.00
Find the right material for you
  • Brass & Bronze
  • Gold, Rhodium & Platinum
  • Silver
  • Steel & Titanium
  • Acrylic & Wood
Brass

Raw Brass has a rustic matte look, with rough surfaces and some tarnishing (color spots). Polished Brass goes through extensive hand polishing to give it a smooth, shiny finish. 3D printed Brass consists of 15% zinc, 5% tin, and 80% copper.

Bronze

Raw bronze has a rustic matte look with rough surfaces. It is a high-detail metal with a deep red color similar to rose gold. It has a subtle marbling effect, and the silvery highlights give each piece their own unique character. Polished Bronze goes through extensive hand polishing to give it a smooth, glossy finish. 3D printed Bronze consists of 10% tin and 90% copper.

Center hole size

1.2 mm

Thickness

Thickness is around 1 mm or less depending on the material and finish (polishing)

Precious Plated

Cast in Brass before going through extensive hand polishing to create a smooth surface texture. After being cast, we underplate the brass with a tin-rhodium alloy to provide strength and durability. Your Memento is then plated with .25 microns of the precious metal of choice. 14k Gold has a subtle, warm coloring, while 18k Gold is brighter and more vibrant. 14k Rose Gold has a pinkish tint, and Rhodium looks like silver. The outcome is a beautiful shiny luster with a high level of detail and smooth surface finish.

Solid Gold & Platinum

All Gold and Platinum products go through extensive hand-polishing to give them a smooth, shiny finish. 14k Gold has a subtle, warm coloring, while 18k Gold is brighter and more vibrant. 14k Rose Gold has a pinkish tint, and 14k White Gold looks like silver with a hint of gold. Platinum has a bright silver-white color. The color difference between 14K and 18K is caused by the amount of gold used. You will also notice that an 18K gold item will be heavier than the same item in 14K gold. We use Lost-Wax Printing and Casting. This means we first 3D print your model in wax and then cast it the traditional way.

Center hole size

1.2 mm

Thickness

Thickness is around 1 mm or less depending on the material and finish (polishing)

Silver

We use Lost-Wax Printing and Casting. This means we first 3D print your model in wax and then cast it the traditional way.
Raw Sterling Silver is mechanically polished so may show print lines and have a rougher surface texture.
Polished Sterling Silver is lightly hand polished to achieve a smooth finish but still can have some surface texture.
Premium Sterling Silver is highly hand polished to a "wet" sheen and looks very shiny.

Center hole size

1.2 mm

Thickness

Thickness is around 1 mm or less depending on the material and finish (polishing)

Stainless Steel

Made with high-grade & high-strength steel (316L). Raw Steel is treated with a blasting operation after printing. Outer surfaces, inner areas and sunken areas get a matte look. This is the gentlest post-processing finish with the highest level of detail.

Titanium

This TiAl6V4 alloy doesn’t look like the traditional shiny milled Titanium. Instead it’s a bit grayer and more matte with a slightly rougher and less defined yet precise surface. It is the strongest material that can currently be 3D printed.

Center hole size

1.2 mm

Thickness

Thickness is around 1 mm or less depending on the material and finish (polishing)

Fluoro Blue

Fluoro Blue Acrylic absorbs light through the surface of the material and emits it from the edge. Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. Acrylic is non toxic and recyclable in some areas. Thickness is of 3 mm (0.118 in). There can be variations from one Memento to another, both in color and thickness. Laser cut and engraved in the USA.

Green Clear

Clear Green Acrylic is clear when viewed through the surface but the edge is green as in the appearance of glass. Acrylic is hard and stiff as plastics go. It is sensitive to stress concentrations sharing a certain fragility with glass. Acrylic is non toxic and recyclable in some areas. Thickness is of 3 mm (0.118 in). There can be variations from one Memento to another, both in color and thickness. Laser cut and engraved in the USA.

Bamboo

Bamboo is a material with natural variation, such as lighter or darker wood grain. The Bamboo sheet is made of five layers of veneer (thin slice of wood). The bamboo joints are visible on the surface and break up the grain creating a unique appearance. Bamboo is 100% renewable and sustainable. Thickness is about 2.7 mm (0.106 in), but it may vary from a sheet to another, our manufacturer tolerance is as follows: 2.5 - 3.2mm. There can be variations from one Memento to another, due to the nature of material, both in appearance and thickness. All wood is susceptible to scratches and water damage. Laser cut and engraved in the USA.

Walnut

Walnut Premium Veneer has an MDF core with real wood veneer (thin slice of wood) on each side which is sanded smooth and finished with a clear coat. It has a high grade appearance, the grain direction will change the overall appearance depending on the light direction. Thickness is about 3.5 mm (0.137 in), but may vary from a sheet to another, our manufacturer tolerance is as follows: 3.0 - 4.0mm). There can be variations from one Memento to another, due to the nature of material, both in appearance and thickness. All wood is susceptible to scratches and water damage. Laser cut and engraved in the USA.

Center hole size

25 mm : 1.25 mm, 30 mm : 1.3 mm, 35 mm : 1.5 mm

GET IN TOUCH

Whether you have a question about our products, a comment or even a partnership proposal, we would love to hear from you !

Contact us